Basic Info.
Model NO.
M15p
Voltage
380V
Customized
Customized
Size
8000*3000*2850mm
Number of Pallets
360
Number of Carts
15
Applicable Materials
Soybean, Corn, Noodles, Mushrooms, Sweet Potatoes
Transport Package
Wooden Box
Specification
2800kg
Trademark
Fude
Origin
Henan China
HS Code
8419399090
Production Capacity
500
Packaging & Delivery
Package Size
800.00cm * 300.00cm * 285.00cm
Package Gross Weight
2800.000kg
Product Description
A dryer is a type of drying equipment that refers to a combination of mechanical devices that use certain technical means to dry water or other liquids on the surface of an object. The popular drying techniques mainly include ultraviolet drying, infrared drying, electromagnetic drying, and hot air drying. They have their own characteristics and are widely used in various mechanical equipment and food drying. The common energy sources on the market for dryers are: air heat pumps, gas, biomass, electric heating, steam, coal/firewood, etc. Using a heat source to provide heat to the drying room to drive the internal heating of the drying room, and then combining with the internal circulating air of the drying machine to dry the product, expelling moisture and achieving the purpose of drying. 
The working principle of the drying room is based on the reverse Carnot cycle principle, using a small amount of electrical energy to use a compressor. The working medium is evaporated into a gaseous state in the evaporator after passing through an expansion valve, and a large amount of heat energy is absorbed from the air. The gaseous working medium is compressed into a high-temperature and high-pressure gas by the compressor, and then enters the condenser to release heat, heating the drying medium. In this continuous cycle of heating, the drying medium can be heated to 40C~85C. Compared to electric drying machines, it saves 35% -40% of electricity.
Suitable for various agricultural products (soybeans, mung beans, and red beans), vegetables (cauliflower, chili peppers, sweet potatoes, artemisia shoots, and rainbow beans), floral tea (tea leaves, honeysuckle, chrysanthemums, osmanthus, and rose flowers).Fruits (mangoes, plums), nuts (pine nuts, walnuts, longans), seasonings (peppercorns, star anise), Chinese herbal medicines (Angelica sinensis, Sichuan scallops), edible mushrooms, wild mushrooms (shiitake mushrooms, red mushrooms, lamb tripe, agaric), meat (dried meat, cured meat, sausages, fish and shrimp, Kunzhong), etc., are dried to retain the aroma of the dried product. The dried product has a good color and appearance. 
Advantages:
1.Air can serve as a heat source and is currently a key energy-saving product promoted by the state. It has low operating costs, is pollution-free, and is suitable for use by a large number of enterprises.
2.Adopting a 7-inch touch screen, segmented control of temperature and humidity, automatic operation throughout the entire process without additional manual supervision.
3.Using a 10cm thick insulation board to make a drying room, the heat is basically not lost, greatly saving operating costs.
4.Secondary heat recovery technology, which removes moisture and recovers heat back to the drying room for recycling and reducing energy loss. 
1.The drying process does not come into contact with the outside world, and the fully enclosed circulating air path ensures the drying and hygiene.
2.The drying room is equipped with multiple circulating fans to ensure uniform air volume and temperature within the drying room. The drying effect of the same batch of materials is maintained, and there are no blind spots during drying.
3.Accurate temperature and humidity control, ensuring good material quality after drying.
Product advantages 1. There are multiple options for heating and drying media, including steam, electricity, and steam electric dual use.
2. Non standard models can be designed according to customer requirements.
3. The control panel has two options: touch type and button type, which are easy to operate and have a longer service life.
4 special sealing and internal circulation systems effectively improve heat utilization and save energy
5. The product has less noise and is easier to install and maintain All accessory products of this series can be fully equipped.
Suitable for various agricultural products (soybeans, mung beans, and red beans), vegetables (cauliflower, chili peppers, sweet potatoes, artemisia shoots, and rainbow beans), floral tea (tea leaves, honeysuckle, chrysanthemums, osmanthus, and rose flowers).Fruits (mangoes, plums), nuts (pine nuts, walnuts, longans), seasonings (peppercorns, star anise), Chinese herbal medicines (Angelica sinensis, Sichuan scallops), edible mushrooms, wild mushrooms (shiitake mushrooms, red mushrooms, lamb tripe, agaric), meat (dried meat, cured meat, sausages, fish and shrimp, Kunzhong), etc., are dried to retain the aroma of the dried product. The dried product has a good color and appearance. Before and after material drying
The air energy heat pump dryer uses the inverse Carnot principle, where the refrigerant (mostly a mixed refrigerant) is compressed by the compressor and becomes a high-temperature and high-pressure gas that enters the heat exchanger (condenser) through a pipeline (copper pipe). Then, the heat generated by the heat exchanger (condenser) is sent to the drying room by the fan to heat and dry food and other materials, thereby drying the materials. The moisture is discharged through the moisture discharge port. The dehumidification system has a heat recovery device, which uses the recovered heat to heat the fresh air, saving 60% to 70% of the energy consumption for preheating the fresh air. 
Advantages:
1.Air can serve as a heat source and is currently a key energy-saving product promoted by the state. It has low operating costs, is pollution-free, and is suitable for use by a large number of enterprises.
2.Adopting a 7-inch touch screen, segmented control of temperature and humidity, automatic operation throughout the entire process without additional manual supervision.
3.Using a 10cm thick insulation board to make a drying room, the heat is basically not lost, greatly saving operating costs.
4.Secondary heat recovery technology, which removes moisture and recovers heat back to the drying room for recycling and reducing energy loss.
1.The drying process does not come into contact with the outside world, and the fully enclosed circulating air path ensures the drying and hygiene.
2.The drying room is equipped with multiple circulating fans to ensure uniform air volume and temperature within the drying room. The drying effect of the same batch of materials is maintained, and there are no blind spots during drying.
3.Accurate temperature and humidity control, ensuring good material quality after drying.
Factory production display diagram
Zhengzhou Fude Machinery Equipment Co, Ltd,Established in 2015,A factorythat integrates machine research, development, manufacturing, and sales,Main production: metal briquetting machines, wood crushers,Organic fertilizer production line and large andmedium-sized equipment for dryers
Service tenet:Integrity based management, To ensure quality control,Satisfy both parties.
Service tenet:Integrity based management, To ensure quality control,Satisfy both parties.
Product advantages 2. Non standard models can be designed according to customer requirements.
3. The control panel has two options: touch type and button type, which are easy to operate and have a longer service life.
4 special sealing and internal circulation systems effectively improve heat utilization and save energy
5. The product has less noise and is easier to install and maintain All accessory products of this series can be fully equipped.
Schematic diagram of box dryer factory and loading
| FAQ Q:Are you a trading company or a manufacturing factory? A:We are a factory. Q:What is your delivery time? A:If the goods are in stock, it usually takes 7-10 days. If the goods are out of stock, it will take 15 to 30 days, calculated by quantity. Q:What is your payment method? A:30% of the total price should be paid in T/T as the down payment; 70% of the remaining payment should be paid in T/T before delivery. Q:Do you provide technical guidance? A:Yes, we will provide you with professional advice on theselection of models and the operation of equipment. |